![](https://sandbox-newtech.tech-access.ca/wp-content/uploads/featured-tag-3.png")
NAIT Centre for Sensors and System Integration (CSSI Format2)
CSSI Format2
Northern Alberta Institute of Technology (NAIT)Ottawa, Ontario
NAIT’s Centre for Sensors and System Integration (CSSI) is a Technology Access Centre (TAC) staffed with professional researchers to support businesses on applied research and development projects that deliver a new product, an improved service, or a more efficient process.
Businesses across all major Alberta industry sectors have identified digital transformation as being the critical next step in their operational evolution. CSSI helps address parts of these digitization challenges through prototyping activities in preparation for later commercialization, which in turn enhance a company’s productivity, competitiveness, and innovation.
We may be automating a manual process, trialing the use of existing technology in an innovative way, sourcing an idea from another industry and developing a tool to meet the application, or designing and building something brand new. NAIT’s Centre for Sensors and System Integration (CSSI) is a Technology Access Centre (TAC) staffed with professional researchers to support businesses on applied research and development projects that deliver a new product, an improved service, or a more efficient process.
Businesses across all major Alberta industry sectors have identified digital transformation as being the critical next step in their operational evolution. CSSI helps address parts of these digitization challenges through prototyping activities in preparation for later commercialization, which in turn enhance a company’s productivity, competitiveness, and innovation.
We may be automating a manual process, trialing the use of existing technology in an innovative way, sourcing an idea from another industry and developing a tool to meet the application, or designing and building something brand new.
- Digital health technology
- Mobile technology
- Interactive technology
- Wearable technology
- Electronics and mechanical technology
- Hackathons
- Concept design
- Expert advice
- Prototyping
- Product development
- Testing and validation
- Commercialization
- Market intelligence
- Opportunity assessment
- Technical support and maintenance
- Business planning
- Strategic consulting
- Artificial intelligence (AI), virtual reality (VR) and interactive capabilities
- Funding acquisition
- Training in AI, Internet of Things (IoT), Mobile application, Design, Data Analysis etc.
| Equipment | Function |
|---|---|
| Micro/Nano technology Lab TESCAN VEGA3 LMU Scanning Electron Microscope (SEM) | SEM is used to produce images of a sample by scanning the surface with a focused beam of electrons. This system is intended for both high- and low-vacuum operations. It also has a variety of imaging modes with valuable capabilities. |
| Multi-Target DC Metal sputter deposition system | DC Sputtering is a thin-film PVD-coating technique where the coating is bombarded with ionized gas molecules causing atoms to be sputtered off into the plasma. It is used extensively in the semiconductor industry to create microchip circuitry on the molecular level. |
| Materials alteration/machining lab 5-Axis OMAX MAXIEM 1515 Abrasive Water Jet | This system uses water jets to cut and machine a wide range of materials from metals and composites to glass and plastics. Its cutting bed size is 48 in × 48 in and can handle a variety of material thicknesses. |
| Universal Testing Machine Tribometer | A Universal Testing Machine (UTM) Tribometer is used to test the tensile strength, friction, and wear of a diverse range of materials, components, and structures to several ASTM test standards. |
| Sentek L0620M-PAS106/AIF/DMF Vibration Test System | This test system is ideally suited to vibration-test small electronic parts, connectors, hand-held units, and mechanical assemblies. It simulates real-world industrial environments. The system is designed to endure severe vibration and shock forces and extreme temperature conditions while testing. |
| Renishaw AM400 3D Metal Printer | This metal-sintering 3D printer is used for rapid-prototyping of metal parts and components. The printer can print parts in stainless-steel, aluminum, and titanium, with a maximum build size of 250 mm x 250 mm x 300 mm. |
| Stratasys F370 Plastic 3D Printer | This plastics-based 3D printer is used for rapid prototyping for the manufacturing or medical devices industries. It uses FDM technology where parts are built layer by layer by heating and extruding thermoplastic filament. The F370 prints in multiple plastics (ABS, PLA, ASA, PC ABS, FDM TPU 92A) in extremely precise 0.005 in. layer thicknesses, and features a medium build size of 355 mm x 254 mm x 355 mm. |
Annie Rochelle
Executive Director
Caroline Chouinard
Director of Research - Mineral Sector
Valarye Desbiens
Director of Operations - Mineral Sector
Katline Guay
Acting Coordinator - Mineral Sector
Pascal Vuillaume
Research Director - Plastics Sector
Eric Leclair
Director of Operations - Plastics Sector
Philippe Bobin
Director and Chair in Advanced Materials
- WIMTACH team partner
- Centennial College
- Canadian Graduates
Request Interactive Visit: http://interactivevisits.ca
Sectors
Advanced Manufacturing
Agriculture
Biotechnology
Business Services
Chemicals and Plastics
Energy
Environmental Technology
Food Innovation
CSSI Format2
CSSI Format1
CSSI Format
CSSI – Format 2
CSSI – Format 1
CSSI – Test6
CSSI – Test4
CSSI – Test4
